User`s manual

AXIS 5470e User’s Manual Section 7: Setting Up - Windows
115
2. Open Network Setup, click Sharing..., check the I want to be
able to allow others to print to my printer(s) box.
3. Install AXIS Print Utility for Windows on the server.
4. Set up your AXIS 5470e as described under Peer-to-Peer Printing,
on page 113.
5. Open Print Manager and select your printer.
6. In the Printer menu, select Share Printer As...
7. Type a printer name in the Share As field (this is the printer
name seen by the clients, see Client Setup below).
Check the Re-share at Startup box, then click OK.
The server setup is now completed.
Note:
Client-Server Printing:
Client Setup
Follow these steps to use your AXIS 5470e for client-server printing
at a Windows for Workgroups client:
1. In the Control Panel, select Printers.
2. Select a printer driver from the list of Installed Printers, or click
Add>> to install a new driver. Click Connect...
3. Select Network... in the Device Name list, select a local port
(LPT1) to redirect to your network printer.
4. In the Show Shared Printers on list, select the server from
Server Setup above.
5. In the Shared Printers list, select the printer you want to use.
6. Click OK, OK and Close.
7. Exit the Control Panel.
The AXIS Print Utility for Windows must be running when you print through your
AXIS 5470e. It is strongly recommended that you copy the AXIS Print Utility icon
into your StartUp folder.