User`s manual

Section 7: Setting Up - Windows AXIS 5470e User’s Manual
114
2. In the Port menu, click Add.
3. In the NPS Port list, select the AXIS 5470e port. The port appear
as <name>.LP1, where <name> is AX followed by the last six
digits of the AXIS 5470e serial number, e.g. AX100086.
4. Accept or change the suggested Windows port name and type
any required comment in the Description field. Make a note of
the Windows port name as you will need this later, then click OK
to install the Windows port.
5. In the Port menu, click Connect... to bring up the Windows
Printers dialog.
6. Select a printer driver from the list of Installed Printers (or click
Add>> to install a new driver), then click Connect...
7. Select the Windows port name from step 4 above (this name can
be found at the bottom of the Ports list).
8. Click OK to close the Connect dialog, and Close to close Printers.
The setup is completed and you can now print through your
AXIS 5470e.
Notes:
.
Client-Server Printing:
Server Setup
Follow the instructions below to install your AXIS 5470e for client-
server printing at a Windows for Workgroups server:
1. Choose a workstation that you want to use as a server for
network printing. The server must be available at all times and
must have sufficient hard disk space for spooling print jobs.
• AXIS Print Utility for Windows must be running when you print through
your AXIS 5470e. It is strongly recommended that you copy the AXIS Print
Utility icon into your StartUp folder.
• To enable TCP/IP printing in Windows 3.1 and Windows for Workgroups
environments, you must use a shareware LPR spooler that can be
downloaded from ftp://ftp.axis.com/pub/axis/software/prt_srv/utility/wlprs/.