User`s guide

AXIS 5470e User’s Guide
16
Configuring the AXIS 5470e
Important!
After you have completed the procedures in The AS/400 Host System Checklist on page 14,
follow the instructions below to configure the AXIS 5470e for SNA printing in the AS/400
environment using a Web browser:
1. Start a Web browser, e.g. Internet Explorer or Netscape Communicator and enter the IP
address or the host name of the AXIS 5470e in the location field. Press Enter.
The internal Web pages of the AXIS 5470e will appear:
Note:
2. Click the Configuration Wizard for IBM sessions button.
3. Click the Add Session button. This will start the Configuration Wizard which is a
step-by-step guide through the required IBM configuration settings.
To perform the instructions presented in this section, you must first assign an IP address to your AXIS 5470e using
one of the methods presented in Assigning an IP address on page 10.
To protect the admin pages and the Configuration Wizard from unauthorized use, enter a password
(default Pass) in the Root Password field under admin | General Settings.