Installation guide
Table Of Contents
- Safeguards
- AXIS P5534 Outdoor T95A Kit
- Installation steps
- Package Contents
- Install the hardware
- Technical Specifications for the AXIS T95A Dome Housing
- Hardware overview - AXIS P5534
- Assign an IP address
- Set the password
- Access the video stream
- Other methods of setting the IP address
- Resetting to the Factory Default Settings
- Accessing the camera from the Internet
- Further information
Page 8 AXIS P5534 Outdoor T95A Kit
before removing the SD card it should be unmounted through the camera’s web pages.
Go to Setup > System Options > Storage > SD Card and click Unmount. For more
information, please see the User’s Manual available from the AXIS Network Video
Product CD supplied with this product or from the website at www.axis.com
4. Put the fastening ring, dome cover (transparent or smoked), and rubber gasket back in their
original positions and fasten the four 10mm M3 dome screws.
Note:
Be careful not to scratch or damage the dome cover. If possible, keep the protective
plastic on the dome cover until the installation is complete.