INSTALLATION GUIDE AXIS P5534 Outdoor T95A10 Kit ENGLISH AXIS P5534 Outdoor T95A00 Kit
Legal Considerations Video and audio surveillance can be prohibited by laws that vary from country to country. Check the laws in your local region before using this product for surveillance purposes. This product includes one (1) H.264 decoder license. To purchase further licenses, contact your reseller.
Safeguards Please read through this Installation Guide carefully before installing the product. Keep the Installation Guide for further reference. WARNING! High voltage - the electrical connection must be made by an authorized electrician. Please observe relevant national and local regulations for the installation. CAUTION! • • • • • • • • IMPORTANT! • This Axis product must be used in compliance with local laws and regulations. Battery replacement This Axis product uses a 3.
AXIS P5534 Outdoor T95A Kit Page 5 AXIS P5534 Outdoor T95A Kit The AXIS P5534 Outdoor T95A Kit can be used in both indoor and outdoor camera installations. Follow these instructions to complete the installation of the AXIS P5534 Outdoor T95A Kit. For all other aspects of using the product, please see the User’s Manual for the AXIS P5534 PTZ Dome Network Camera, and the AXIS P5534 Installation Guide, available on the CD included in this package, or from www.axis.
Page 6 AXIS P5534 Outdoor T95A Kit (3) M3 nuts (4) M4 nuts (4) Lock washers (1) 3mm Allen key (1) Desiccant salt bag Tools/ Parts not included Phillips screw driver Adjustable wrench Other required parts Mounting bracket See www.axis.
AXIS P5534 Outdoor T95A Kit Page 7 Install the hardware Prepare for installation Housing ENGLISH Rubber gasket Dome cover Fastening ring Dome screws 1. Remove the fastening ring, dome cover and rubber gasket at the bottom of the housing by loosening the four 10mm M3 dome screws. 2. Remove the protective packing. Protective packaging 3. Optionally, insert an SD card (not included) into the SDHC (Secure Digital High Capacity) card slot.
Page 8 AXIS P5534 Outdoor T95A Kit before removing the SD card it should be unmounted through the camera’s web pages. Go to Setup > System Options > Storage > SD Card and click Unmount. For more information, please see the User’s Manual available from the AXIS Network Video Product CD supplied with this product or from the website at www.axis.com 4. Put the fastening ring, dome cover (transparent or smoked), and rubber gasket back in their original positions and fasten the four 10mm M3 dome screws.
AXIS P5534 Outdoor T95A Kit Page 9 Install the mounting bracket Note: Make sure all cables are in place but not powered, before you install the bracket. Keep cables unpowered until the installation is complete. 1. Install the bracket for the AXIS P5534 Outdoor T95A Kit on a wall and make sure that the screws and plugs are appropriate for the wall (wood, metal, concrete, or any other), and suitable for the weight of the housing. To install the bracket in the correct direction, see figure below.
Page 10 AXIS P5534 Outdoor T95A Kit Remove top cover of the AXIS P5534 Outdoor T95A Kit Remove the top cover of the housing (with four screws) from the housing using the 3mm allen key. Top cover Mount the housing to the bracket Notes: • Ensure that the bracket is securely fastened, and cables are pulled through it before mounting the camera housing. Ensure that no power is connected to the cables. • Be very careful not to drop anything into the housing.
AXIS P5534 Outdoor T95A Kit Page 11 Connect cables for the AXIS T95A00 dome housing 1. Attach the power cable (100-240 VAC) to the housing. 2. Attach the network cable. Do not connect the network cable to a PoE switch. 100-240V AC L N GND ENGLISH Earth the housing applying the two supplied cables to the cover and body using the M3 screws and toothed washers. The safety wire should remain fastened during service.
Page 12 AXIS P5534 Outdoor T95A Kit Connect cables for the AXIS T95A10 dome housing 1. Attach the power cable (24 VAC) to the housing. 2. Attach the network cable. Do not connect the network cable to a PoE switch. L 24V AC N 24V AC GND The safety wire should remain fastened during service. Place the desiccant bag on the side of the housing away from cables and electrical components.
AXIS P5534 Outdoor T95A Kit Page 13 Complete the installation 1. Check that all cables and wires in the housing are properly connected. 2. Replace the top cover of the housing and tighten the screws using the supplied Allen key. 3. Connect the AXIS T95A housing to the power supply (110-240 VAC or 24 VAC - depending on the version you are using). 4. Follow the instructions in Assign an IP address, on page 18, and Set the password, on page 21, to install the camera on the network.
Page 14 AXIS P5534 Outdoor T95A Kit Technical Specifications for the AXIS T95A Dome Housing Note: Technical specifications for AXIS P5534 are available in the AXIS P5534 User’s Manual. General Built in die-cast aluminium Epoxypolyester powder paint RAL9002 color Lower dome in polycarbonate Smoked or transparent Sunshield in ABS for outdoor use RAL9002 color Mechanical External dimensions with sunshield Ø 351 x 335 mm (13.8 x 13.2”) External dimensions without sunshield Ø 314 x 322 mm (12.4 x 12.
AXIS P5534 Outdoor T95A Kit Page 15 Environment Indoor / Outdoor Operating temperature: -30° C to +50° C (-22° F to +122° F) Compliance • CE according to EN61000-6-3, EN 60950, EN50130-4 • IP66 according to EN 60529 Package 6.9 kg / 15.2 lb. Package weight 8.5 kg / 18.8 lb. Package dimensions (B x H x L) 38.5 x 38.5 x 47 cm / 15.1 x 15.1 x 18.
Page 16 AXIS P5534 Outdoor T95A Kit Hardware overview - AXIS P5534 Control button SDHC card slot Status indicator LED Restart button Please note that AXIS P5534 is already installed as a part of the AXIS P5534 Outdoor T95A Kit and is not easily accessible. For the SDHC card slot see Prepare for installation, on page 7. For the LED status indicator, see page 17. For the control and restart buttons, see Resetting to the Factory Default Settings, on page 25.
AXIS P5534 Outdoor T95A Kit Page 17 AXIS P5534 Status indicators LED Color Indication Unlit Steady connection/normal operation Amber Steady during system initiating and reset to factory default. Flashes during firmware upgrade. Amber/red No network connection Red Firmware upgrade failure Green Steady for 10 sec.
Page 18 AXIS P5534 Outdoor T95A Kit Assign an IP address Most networks today have a DHCP server that automatically assigns IP addresses to connected devices. If your network does not have a DHCP server the network camera will use 192.168.0.90 as the default IP address. If you would like to assign a static IP address, the recommended method in Windows is either AXIS IP Utility or AXIS Camera Management. Depending on the number of cameras you wish to install, use the method that best suits your purpose.
AXIS P5534 Outdoor T95A Kit Page 19 AXIS IP Utility - single camera/small installation AXIS IP Utility automatically discovers and displays Axis devices on your network. The application can also be used to manually assign a static IP address. ENGLISH Note that the computer running AXIS IP Utility must be on the same network segment (physical subnet) as the network camera. Automatic discovery 1. 2. 3. 4. Check that the camera is connected to the network and that power has been applied.
Page 20 AXIS P5534 Outdoor T95A Kit AXIS Camera Management - multiple cameras/large installations AXIS Camera Management can automatically discover multiple Axis devices, show connection status, manage firmware upgrades and set IP addresses. Automatic discovery 1. Check that the camera is connected to the network and that power has been applied. 2. Start AXIS Camera Management. When the network camera appears in the window, right-click the link and select Live View Home Page. 3.
AXIS P5534 Outdoor T95A Kit Page 21 Set the password To gain access to the product, the password for the default administrator user root must be set. This is done in the ‘Configure Root Password’ dialog, which is displayed when the network is accessed for the first time. To prevent network eavesdropping when setting the root password, this can be done via an encrypted HTTPS connection, which requires an HTTPS certificate.
Page 22 AXIS P5534 Outdoor T95A Kit Access the video stream The Live View page of the network camera is displayed, with links to the Setup tools, which allow you to customize the camera. If required, click Yes to install AMC (AXIS Media Control), which allows viewing of the video stream in Internet Explorer. You will need administrator rights on the computer to do this.If required, click the link to install missing decoders.
AXIS P5534 Outdoor T95A Kit Page 23 Other methods of setting the IP address The table below shows the other methods available for setting or discovering the IP address. All methods are enabled by default, and all can be disabled. Notes UPnP™ Windows When enabled on your computer, the camera is automatically detected and added to “My Network Places.” Bonjour MAC OSX (10.4 or later) Applicable to browsers with support for Bonjour. Navigate to the Bonjour bookmark in your browser (e.g.
Page 24 AXIS P5534 Outdoor T95A Kit Set the IP address with ARP/Ping 1. Acquire an IP address on the same network segment your computer is connected to. 2. Locate the serial number (S/N) on the product label on the camera. 3. Open a command prompt on your computer and enter the following commands: Windows syntax: Windows example: arp -s ping -l 408 -t arp -s 192.168.0.125 00-40-8c-18-10-00 ping -l 408 -t 192.168.0.
AXIS P5534 Outdoor T95A Kit Page 25 Resetting to the Factory Default Settings To reset the camera to the original factory default settings, use the control button and reset button on the side of the camera (see page 16) as described below. This will reset all parameters, including the IP address, to the factory default settings. Accessing the camera from the Internet Once installed, your network camera is accessible on your local network (LAN).
Installation Guide AXIS P5534 Outdoor T95A Kit © Axis Communications AB, 2010 Ver.1.0 Printed: July 2010 Part No.
