User manual

AXIS P3304-V Fixed Dome Network Camera
Accessing the product
AXIS Media Control viewer toolbar
The AXIS Media Control viewer toolbar is avail able in Internet Explorer only. See AXIS Media Control (AMC), on page 12 for m ore
information. The toolbar displays the following butto ns:
The Play button connects to the Axis product and starts playing a media stream.
The Stop button stops the media stream.
The Snapshot button takes a snapshot of the video image. The location where the image is saved can be specified
in the AMC Control Panel.
Click the View Full Screen button and the video image will fill the entire screen. Press ESC (Escape) on the computer
keyboard to cancel full screen view.
The Record button is used to record the current video stream. The location where the recording is saved can be specified
in the AMC Control Panel.
AMC Audio controls
AMC audio buttons control the speakers and microphone connected to the client computer. The buttons are only visible when
audio is enabled.
Speaker button — Click to turn the speakers on or off.
Microphone button – C lick to mute or unmute the microphone. In Simplex - Network Camera speaker only mode,
click this button to s top sending audio to the product.
Use the slider to control the volume of the speakers and the microphone.
Half-duplex mode
The Talk/Listen button is used to switch between sending and r eceiving audio. The button can be configured
from the Audio tab in the AMC Con trol panel:
• Push-To-Talk mode: Click and hold the button to t alk/send . Release the button to listen.
• Toggle mode: Click once to s witch between talking and listening.
Simplex – Network Camera speaker only mode
To send audio, the Talk and Microphone buttons must both be enabled. Click either button to stop audio
transmission.
PTZ Controls
The Live View page also displays Pan/Tilt/Zoom (PTZ) controls. The administrator can e nable/disable controls for specified users under
System Options > Security > Users.
Note
These controls are available if di
gital PTZ is enabled in t he selected view area, see View Area, on page 18.
10