User`s manual

40
AXIS P1311 - Unit connectors
The following connection diagram gives an example of how to connect an auxiliary device to the AXIS P1311.
Digital Input 3 Connect to GND to activate, or leave fl
oating (unconnected) to deac-
tivate.
Min. input = -40V DC
Max. input= +40V DC
Digital Output 4 Uses an open-drain NFET transistor with
the source connected to
GND. If used with an external relay, a diode must be connected in
parallel with the load, for protection against voltage transients.
Max. load =100 mA
Max. voltage = + 40V
DC
Function Pin Notes Specifications
1
2
E.g. push button
3
4
3.3V
max. 50mA
D
S
G