User manual

AXIS P1214–E Network Camera

System Options

NOTICE

Improper use may cause unexp ected behavior and loss of contact with the Axis product.

Axis strongly recommends that you do not use this function unless y ou understand the consequences. Axis Support does not provide

assistance for problems with customized scripts.

To open the Script Editor, go to System Options > Advanced > Scripting. It is recommended to create a backup ﬁle before

customizing the scripts. If a script causes problems, reset the product to its factory default settings, see page 40.

For more information, s ee www.axis.com/developer

File Upload

Files, for example web pages and images, can be uploaded to the Axis product and used as custom settings. To up load a ﬁle, go

to System Options > Advanced > File Upload.

Uploaded ﬁles are accessed through http://<ip address>/local/<user>/<file name> where <user> is the

selected user group (viewer, operator or a dministrator) for the uploaded ﬁle.

Plain Con ﬁg

Plain Conﬁg is for advanced users with experience of Axis product conﬁguration. Most parameters can be set and modiﬁed from this

page. Help is available from the standard help pages.

To open Plain Conﬁg, go to System Options > Advanced > Plain Conﬁg.

Reset to Factory Default Settings

This will reset all parameters, including the IP address, to the factory default settings:

1. Disconnect power from the product.

2. Press and hold the Control button and reconnect power (see Hardware Overview on page 4 ).

3. Keep the Control button pressed for about 15 seconds until the Status indicator ﬂashes amber.

4. Release the Control button. The process is complete after about 1 minute (when the Status indicator turns green). The

product has been reset to the factory default settings. The default IP address is 192.168.0.90

5. Re-assign the IP address.

It is also possible to reset parameters to factory default via the web interface. Go to Setup > System Options > Maintenance.