User manual

AXIS P1214–E Network Camera
Events
Note
A network share can also b e used as a storage device for recorded video. Go to System Options > Storage to configure a
network share before setting up a continuous recordingoranactionruletorecordvideo. SeeStorage on page 37 for more
information about storage devices.
To add a recipient:
1. Go to Events > Recipients a n d click Add.
2. Enter a descriptive name.
3. Select a recipient Type.
4. Enter the information needed for the recipient type.
5. Click Test to test the connection to the recipient.
6. Click OK.
Schedules
Schedules can be used as action rule triggers or as additional conditions, for example to record video if motion is detected outside
office hours. Use one of the predefined schedules or create a new schedule as described below.
To create a new schedule:
1. Go to Events > Schedules and click Add.
2. Enter a descriptive name and the information needed for a daily, wee kly, monthly or yearly schedule.
3. Click OK.
To use the schedule in an Action Rule, select the schedule from the Sche
dule drop-down list i n the Action Rule Setup page.
Recurrences
Recurrences are used to trigger Actio
n Rules repeat edly, for example ev ery 5 minutes or every hour.
To set up a recurrence:
1. Go to Events > Recurrences
and click Add.
2. Enter a descriptive
name and recurrence p attern.
3. Click OK.
To use
therecurrenceinanActionRule,first select Time from the Trigger drop-down list in the Action Rule Setup page and
then select the recurrence from the second drop-down list.
To modify or remove recurrences, selec t the r ecurrence in the Recurrences List and click Modify or Remove.
27