User manual

AXIS M1014 Network Camera
Hardware Overview
SD card slot - A standard or high-capacity microSD card (not included) can be used for local recording w ith removable storage.
NOTICE
To prevent corruption of recordings, the SD card should be unmounted before removal. To unmount, go to Setup > System
Options > Storage > SD Card and click Unmount.
Control button - The control button is used for:
• ConnectingtoanAXISVideoHostingSystemservice.See
page 34 . To connect, press and hold the button for about
1 second until the Status LED flas hes green.
• ConnectingtoAXISInternetDynamicDNSService. See
page 34 . To c onnect, press and hold the button for
about 3 seconds.
• Resetting the produ ct to factory default settings. See
page 40 .
Power connector - Mini DC connector
LED Indicators
LED
Color
Indication
Green
Steady for connection to a 100 MBit/s network. Flashes for network activity.
Amber
Steady for connection to a 10 MBit/s network. Flashes for network activity.
Network
Unlit No network connection.
Green Steady green for normal operation.
Amber
Steady during startup and when restoring settings.
Status
Red
Slow flash for failed upgrade.
Green
Normal operation.
Power
Amber
Flashes green/amber during firmware upgrade.
Note
• The Network LED can be configured to be unlit during normal operation. To configure, go to Setup > System Options >
Ports & Devices > LED. See the online help for more information.
• The Status LED can be con figured to be unlit during normal operation. To configure, go to Setup > System Options >
Ports & Devices > LED. See the online help for more information.
• The Status LED can be configured to flash while an event is active.
• The Status LED can be
configured to flash for identifying the unit. Go to Setup > System Options > Maintenance .
5