User manual

AXIS M1013 Network Camera

Accessing the Product

Controls on the Live View Page

The Stream Proﬁle drop-down list allows you to select a customized or pre-programmed stream proﬁle. Stream

proﬁles are conﬁgured under Video > Stream Proﬁles.See

Stream Proﬁles, on page 16

The Manual Trigger button is used to trigger an action rule from the Live View page; see

page 9

. Enable this

button from Live View Conﬁg > Action Buttons.

Click Snapshot to save a snapshot of the video image. Right-click the video image to save it in JPEG format on your

computer. This button is primarily intended for u se when the AXIS Media Control viewer toolbar is not ava ilable.

Enable this button from Live View Conﬁg > Action Buttons.

Manual Trigger

The Manual Trigger is used to trigger an actio n rule from the Live View page. The manual trigger can for example be used to

validate actions during product installation and c on ﬁguration.

To conﬁgure the manual trigger:

1. Go to Setup > Events.

2. Click Add to add a new action rule.

3. From the Trigger drop-down list, select Input Signal.

4. From the second drop -down list, select Manual Trigger.

5. Select the desired action and conﬁgure the other settings as required.

For more information about action rules, see

Events, on page 27

To show the manual trigger buttons in the Live View page:

1. Go to Setup > Live View Layout.

2. Under Action Buttons,selectShow manual tri

gger button.

AXIS Media Control viewer tool bar

The AXIS Media Control viewe r toolbar is availab le in Interne t Explorer only. See

AXIS Media Control (AMC), on page 11

for more

information. The toolbar displays the following buttons:

The Play button connects to the A xis product and starts playing a media stream.

The Stop button stops the m edia stream.

The Snapshot button takes a snapshot of the video image. The location where the image is saved can be speciﬁed

in the AMC Control Panel.

Click the View Full Screen button and the video image w ill ﬁll the entire screen. Press ESC (Escape) on the computer

keyboard to cancel full screen view.

The Record button is used t o record the current video stream. The lo cation where the recording is saved can be speciﬁed

in the AMC Control Panel.