User manual

AXIS M1013 Network Camera
Accessing the Product
Note
• The default administrator user name root is permanent and cannot be deleted.
• If the password for root is lost, the product must be reset to the factory default settings. See
Reset to Factory Default
Settings, on page 41
.
Set Power Line Frequency
Power line frequency is set the first time the Axis product is accessed and can only be changed fr om Plain Config(see page 41 )
or by resetting the product to factory default.
Select the power line f requency (50 Hz or 60 Hz) used at the location of the Axis product. Selecting the wrong frequency may cause
image flickeriftheproductisusedinfluorescent light environments.
When using 50 Hz, the maximum frame rate is limited to 25 fps.
Note
Power line frequency is different in different geographic regions. In the Americas, 60 Hz is usually used; most other parts of
the world use 50 Hz. Local variations may apply, always check with the local authorities.
The Live View Page
The controls and layout of the Live View page may have been customized to meet specific installation requirements and user
preferences. Consequently, so
me of the examples and functions featured here may differ from those displayed in your own Live View
page. The following provides an overview of each available control.
8