User`s manual

Appendix A: The Parameter List
Axis AFP User’s Manual 99
#1008 Bin 1 Vertical Offset
This parameter adds a vertical offset regardless of mode and orientation when
printing from bin 1. Use this parameter only when you need different vertical off-
sets for different input bins.
Notes: 1. This parameter is valid in all modes, including local function listings, such as
the parameter list and IBM hex dump.
2. The vertical offset is always parallel to the paper feed direction, regardless of
the print orientation.
3. The horizontal offset is added to the Top Portrait Margin, Left Landscape
Margin, Left COR Margin, Bind Top Origin 0 or Bind Left Origin 1,
depending on print orientation and mode.
4. The offset is always independent of any scaling, global or bin specific.
#1050 Bin 2 Physical Paper Size
Defines the paper size for Bin 2.
See #1000 Bin 1 Physical Paper Size.
Value
Description
0 - 999
Vertical offset for bin 1 (measured in
1
/100").
* 0
Factory default value.
Related parameters: #721 Top Portrait Margin #731 Bind Top Origin 0
#722 Left Landscape Margin #733 Bind Left Origin 1
#724 Left COR Margin #1007 Bin 1 Horizontal Offset