User`s manual

Appendix A: The Parameter List
98 Axis AFP User’s Manual
#1007 Bin 1 Horizontal Offset
This parameter adds a horizontal offset regardless of mode and orientation when
printing from bin 1. Use this parameter only when you need different horizontal
offsets for different input bins.
Notes: 1. This parameter is valid in all modes, including local function listings, such as
the parameter list and IBM hex dump.
2. The horizontal offset is always perpendicular to the paper feed direction,
regardless of the print orientation.
3. The horizontal offset is added to the Left Portrait Margin, Top Landscape
Margin, Top COR Margin, Bind Left Origin 0 or Bind Top Origin 1,
depending on print orientation and mode.
4. The offset is always independent of any scaling, global or bin specific.
Value
Description
0 - 999
Horizontal offset for bin 1 (measured in
1
/100").
* 0
Factory default value.
Related parameters: #720 Left Portrait Margin #730 Bind Left Origin 0
#723 Top Landscape Margin #733 Bind Top Origin 1
#725 Top COR Margin #1008 Bin 1 Vertical Offset