User`s manual

Appendix A: The Parameter List
Axis AFP User’s Manual 97
#1006 Bin 1 Vertical Scale Factor
Any non-zero value will override the vertical scaling of the complete page when
printing from bin 1. Use this parameter only when you need different vertical scal-
ing for different input bins. The scaling is made relative the origin of the paper in
the upper left corner.
Notes: 1. This parameter is valid in all modes, including local function listings, such as
the parameter list and IBM hex dump.
2. The vertical scaling is always parallel to the paper feed direction, regardless of
the print orientation.
3. Using this parameter to enlarge or compress the size of the printout may
result in interference patterns in images, due to the scaling.
4. A scale factor below 90% disables Load Font Smoothing.
Value
Description
1 - 999
Vertical scale factor for bin 1 (in percent).
* 0
Use the global scaling set by #3003 (default)
Related parameters: #1005 Bin 1 Horizontal Scale Factor #3002 Horizontal Scale Factor (global)
#1007 Bin 1 Horizontal Offset #3003 Vertical Scale Factor (global)
#1008 Bin 1 Vertical Offset #3011 Load Font Smooting