User`s manual

Appendix A: The Parameter List
96 Axis AFP User’s Manual
#1005 Bin 1 Horizontal Scale Factor
Any non-zero value will override the horizontal scaling of the complete page when
printing from bin 1. Use this parameter only when you need different horizontal
scaling for different input bins. The scaling is made relative the origin of the paper
in the upper left corner.
Notes: 1. This parameter is valid in all modes, including local function listings, such as
the parameter list and IBM hex dump.
2. The horizontal scaling is always perpendicular to the paper feed direction,
regardless of the print orientation.
3. Using this parameter to enlarge or compress the size of the printout may
result in interference patterns in images, due to the scaling.
4. A scale factor below 90% disables Load Font Smoothing.
Value
Description
1 - 999
Horizontal scale factor for bin 1 (in percent).
* 0
Use the global scaling set by #3002 (default)
Related parameters: #1006 Bin 1 Vertical Scale Factor #3002 Horizontal Scale Factor (global)
#1007 Bin 1 Horizontal Offset #3003 Vertical Scale Factor (global)
#1008 Bin 1 Vertical Offset #3011 Load Font Smooting