User`s manual

Appendix A: The Parameter List
82 Axis AFP User’s Manual
#606 FF Command Position
3270/Coax only Defines at which print positions a Form Feed command shall be valid.
Notes: 1. This parameter has only effect in DSC/DSE mode.
2. This parameter emulates an IBM 3812/3816 front panel switch: Form Feed
Command Position Options.
#607 Auto Func after End of Print Buffer
3270/Coax only Defines if there shall be an automatic New Line or Form Feed at end of the buffer.
Notes: 1. This parameter has only effect in DSC/DSE mode.
2. This parameter emulates an IBM 3812/3816 front panel switch: Automatic
Form Feed at End of Print Order.
Related parameters: #600 Auto Func at End of OILC Job
#604 FF at End of Print Buffer
Value
Description
* 0
Execute FF only if it occurs at Þrst print position or MPP+1. (default)
1
Execute FF everywhere it occurs.
Value
Description
* 0
Action after FF at end of print buffer is determined by #604. (default)
1
Add an automatic FF unless already in top of form position.