User`s manual

Appendix A: The Parameter List
80 Axis AFP User’s Manual
#602 Additional NL at MPP+1
3270/Coax only Defines if there shall be an additional New Line when the New Line command is
executed at MPP+1.
Notes: 1. This parameter has only effect in DSC/DSE mode.
2. This parameter emulates an IBM 3812/3816 front panel switch: c19 Addi-
tional New Line at MPP+1.
#603 FF within Print Buffer
3270/Coax only Defines if there shall be an extra space after executing a Form Feed command.
Notes: 1. This parameter has only effect in DSC/DSE mode.
2. This parameter emulates an IBM 3812/3816 front panel switch: Form Feed
Options within the Print Buffer.
Value
Description
0
No additional NL when NL at MPP+1.
* 1
Additional NL when NL at MPP+1. (default)
Value
Description
* 0
When a FF is executed, the next form will start at print position 2. (default)
1
When a FF is executed, the next form will start at print position 1.