User`s manual

Appendix A: The Parameter List
70 Axis AFP User’s Manual
#10 Device Address
5250/Twinax only Shows the last Twinax Device Address set by the push-wheel.
Notes: 1. Do not change this value – the Device Address is always set by the push-
wheel.
2. A message is printed when the Device Address has been changed:
Message printed when the Device Address is changed from 6 to 3.
Value
Description
0 - 6
Last Twinax Device Address.
* 7
Device Address not yet assigned. (default)
ATTENTION!
DEVICE ADDRESS HAS BEEN CHANGED TO 3.
PREVIOUS DEVICE ADDRESS WAS 6.