User`s manual

Section 7: Compatibility Considerations
62 Axis AFP User’s Manual
There are also a set of parameters that allow local scaling and positioning for each
input bin individually. These parameters are:
Important: You need only use these parameters if different scaling and positioning for differ-
ent input bins are required. As long as these parameters are set to their default val-
ues, the global scaling and positioning can be fully controlled by the parameters
listed on the previous page.
The following rules apply to the local scaling and positioning parameters:
• Local scaling and positioning affects both IPDS and non-IPDS printing.
• A local Horizontal Scale Factor overrides the global scaling set by the Hori-
zontal Scale Factor (#3002). Horizontal scaling is always perpendicular to the
paper feed direction regardless of the print orientation.
• A local Vertical Scale Factor overrides the global scaling set by the Vertical
Scale Factor (#3003). Vertical scaling is always parallel to the paper feed direc-
tion regardless of the print orientation.
• A local Horizontal Offset is added to the margin set by the Margin (non-
IPDS) and Bind Origin (IPDS) parameters. Horizontal positioning is always
perpendicular to the paper feed direction regardless of the print orientation.
• A local Vertical Offset is added to the margin set by the Margin (non-IPDS)
and Bind Origin (IPDS) parameters. Vertical positioning is always parallel to
the paper feed direction regardless of the print orientation.
#1005 Bin 1 Horizontal Scale Factor #1107 Bin 3 Horizontal Offset
#1006 Bin 1 Vertical Scale Factor #1108 Bin 3 Vertical Offset
#1007 Bin 1 Horizontal Offset #1155 Bin 4 Horizontal Scale Factor
#1008 Bin 1 Vertical Offset #1156 Bin 4 Vertical Scale Factor
#1055 Bin 2 Horizontal Scale Factor #1157 Bin 4 Horizontal Offset
#1056 Bin 2 Vertical Scale Factor #1158 Bin 4 Vertical Offset
#1057 Bin 2 Horizontal Offset #1205 Bin 5 Horizontal Scale Factor
#1058 Bin 2 Vertical Offset #1206 Bin 5 Vertical Scale Factor
#1105 Bin 3 Horizontal Scale Factor #1207 Bin 5 Horizontal Offset
#1106 Bin 3 Vertical Scale Factor #1208 Bin 5 Vertical Offset