User`s manual

Section 7: Compatibility Considerations
Axis AFP User’s Manual 61
Printable Area
The IBM 4028/3916, 3812 and 3816 printers allow printing on the complete
page. Many PostScript printers, however, have an unprintable area of approxi-
mately 1/4 inch around the edges of the paper (the shaded area in the figure be-
low).
Origin 0 ® ¬ Origin 1
Origin 3 ®¬ Origin 2
Axis AFP has a set of parameters that can be used to offset the origin of printed
data and to compress the page contents horizontally and vertically. These param-
eters are:
• The Left and Top Portrait/Landscape/COR Margin parameters only affect
non-IPDS printing.
• The Bind Left and Top Origin parameters only affect IPDS printing. They
allow adjustment of margins in four print directions, 0, 90, 180 and 270
degrees. Both positive and negative values (in units of
1
/100") can be used.
• The Horizontal and Vertical Scale Factors allow scaling of the printed data
from 1% to 999%, where 100% is the 1:1 size (no scaling).
Ý
Feed direction
#720 Left Portrait Orientation #732 Bind Left Origin 1
#721 Top Portrait Margin #733 Bind Top Origin 1
#722 Left Landscape Margin #734 Bind Left Origin 2
#723 Top Landscape Margin #735 Bind Top Origin 2
#724 Left COR Margin #736 Bind Left Origin 3
#725 Top COR Margin #737 Bind Top Origin 3
#730 Bind Left Origin 0 #3002 Horizontal Scale Factor
#731 Bind Top Origin 0 #3003 Vertical Scale Factor