User`s manual

Section 5: Fonts
38 Axis AFP User’s Manual
Printer Resident Fonts
The rest of this section deals with printer resident fonts. The table in Section 5.3
lists all IBM fonts that are recognized by the Axis AFP, and the corresponding
PostScript printer fonts. The non-standard PostScript fonts are resident in the
Axis AFP (OCR-B is one example), so you don’t need font cards etc. to use the
listed fonts.
In IPDS mode, printer resident fonts can be selected by the system referring to the
FGID (Font Global IDentifier) and FW (Font Width). Axis AFP supports a large
set of resident fonts.
Coax only: For PSF systems, resident fonts need to be mapped to the host font name and code
page. In PSF/MVS, this is done using the APSRMARK utility and in PSF/VM us-
ing the APRFTBLV (RSCS) or APRFTIDB files. For more information, refer to
the PSF/MVS and PSF/VM manuals.
The FGIDs are grouped according to the following table:
FGID (hex) FGID (dec) TYPE
0001 - 0041 1 - 65 10 CPI
0042 - 0099 66 - 153 12 CPI
009A - 00C8 154 - 200 Proportional PSM
00C9 - 00D2 201 - 210 13 CPI
00D3 - 00EF 208 - 239 15 CPI
00F0 - 00F7 240 - 247 5 CPI
00F8 - 0103 248 - 259 17 CPI
0104 - 0111 260 - 273 8 CPI
0112 - 0117 274 - 279 17 CPI
0118 - 011B 280 - 283 20 CPI
011C - 0120 284 - 288 25 CPI
0121 - 012B 289 - 299 27 CPI
012C - 01FF 300 - 511 10 CPI
0200 - 0EFF 512 - 3839 Typographic
0F00 - 0FFF 3840 - 4095 User Defined Fonts
1000 - FFFE 4096 - 65534 Typographic