User`s manual

Section 4: Advanced Functions
34 Axis AFP User’s Manual
Parameter Editing
This function is reached from the ‘Edit Parameters’ entry in the Main Menu (see
Section 3 on how to start the Configuration).
Select ‘Edit Parameters’ in the Main Menu.
The Edit Parameters sub menu is shown for an Axis AFP set up for coax connec-
tion. For twinax connection the menu lists relevant twinax parameters.
To edit parameters, follow these steps:
1. Use the Up and Down keys to move the highlighted line to the desired
parameter. The display scrolls one line when the bottom line is reached. You
can also scroll a whole page by pressing the Left key.
2. Press Right to edit. The cursor moves from the ID column to the SETTING
column, and the help message changes to ‘Use the cursor keys to edit, ...’.
3. Use the cursor keys to change the value. If you are editing a string parame-
ter, new bytes will be added when Right is pressed. To truncate a string, place
the cursor at a null byte ($00) and press Enter. Note that all subsequent bytes
must also be null bytes.
4. Press Enter to return from edit mode. The cursor moves to the ID column,
and the help message changes to ‘Use <Up> and <Down> to move, ...’.
5. Press Enter once more to exit. The Main Menu is displayed.
============================================================================
EDIT PARAMETERS
============================================================================
ID DESCRIPTION SETTING
0050 System Language : US English
0051 Load Translate Table : No
0052 IBM Printer Emulation : 4028/3916
0100 Maximum Page Length : 66
0101 Maximum Print Position : 132
0102 Lines Per Inch : 6
0103 Characters Per Inch : 10
0201 Line Spacing : Single
0202 Case : Dual
0300 Default Input Bin : Bin 1
0301 Paper Cassette Linking : Off
0302 High Capacity as Primary : 0
0400 Screen Size for Local Copy : 1920
0402 Extended Attribute Buffer : Yes
0500 Intervention Time-out : 10
0501 Early Print Complete : No
Use <Up> and <Down> to move, <Right> to edit, <Enter> to exit