User`s manual

Section 3: Configuration
Axis AFP User’s Manual 31
Exit the Configuration
Select ‘Exit’ in the Main Menu.
A message is shown while the configuration program is being closed, then the
screen is blanked.
If you have selected ‘Exit’ without saving the current configuration, the following
prompt will be shown:
Press Enter to save, or any cursor key to abandon changes.
Disconnect the cable between your terminal and the Axis AFP and connect it to
your system. To ensure a correct start-up, the Axis AFP and printer should be
powered off before connecting the cables.
Save Configuration (Yes=<Enter>, No=<any cursor key>)?
If the Axis AFP is set up for twinax connection, make shure that the rotary
switch is set to the correct device address before connecting it to the twinax line.