User`s manual

Section 3: Configuration

Axis AFP User’s Manual 25

Select Bin 1

Orientation

This selection defines the default print orientation when printing from Bin 1.

The default selection is Reduction, which means that the Computer Output Re-

duction (COR) feature is enabled.

Select the default Bin 1 Orientation.

Select Bin 2

Physical Paper Size

The physical paper size selection must match the actual paper size you are using

for Bin 2. The predefined sizes are Executive, Letter, Legal, A4, and A3.

The default size is A4.

If you are using some other paper format, select Custom. This selection requires

that you define the paper size by setting parameters #1051 and #1052 to the ap-

propriate values, see Appendix A.

Select the paper size for Bin 2.

Select Bin 2

Orientation

This selection defines the default print orientation when printing from Bin 2.

The default selection is Reduction, which means that the Computer Output Re-

duction (COR) feature is enabled.

Select the default Bin 2 Orientation.

Select Default Input

Bin

This selection defines which input paper bin should be used as default at power

up.

The default selection is Bin 1.

Select the default input bin.

This parameter has no effect in IPDS mode.