User`s manual

Section 3: Configuration
Axis AFP User’s Manual 21
Select PostScript
Virtual Memory Size
This sub menu is shown after you have selected Printer Driver.
This value defines how much memory the Axis AFP can use in the PostScript
printer for storing resources. Adjust the value to match the ‘Free PostScript VM
Size’ given on the power-on page (see Section 2).
The default value is 1200 kbytes.
Select the PostScript Virtual Memory Size.
Use the cursor keys to change the value.
Select Color Support The Color Support setting determines how color information is to be interpreted.
‘Yes’ (enabled) means that color commands are sent to the printer. ‘No’ (disabled)
means that color information is converted to black-and-white patterns.
The default setting is ‘No’.
Select the desired Color Support setting.
Select Duplex
Support
The Duplex Support setting determines whether duplex support for the attached
printer shall be reported to the host. ‘Yes’ (enabled) means that duplex commands
are transferred to the printer. ‘No’ (disabled) means that duplex printing is not
supported.
The default setting is ‘Yes’.
Select the desired Duplex Support setting.
Do not select a value higher than the reported Free PostScript VM Size.