User`s manual

Section 3: Configuration

20 Axis AFP User’s Manual

Basic Conﬁguration

The ‘Basic Configuration’ entry initiates a configuration procedure which will

guide you through a sequence of sub menus. You will be prompted for selections

in the following order:

Default settings:

1. Printer Driver (PostScript Level 1)

2. PostScript Virtual Memory Size (1200)

3. Color Support (No)

4. Duplex Support (Yes)

5. IBM Printer Emulation (IBM 4028/3916)

6. System Language (US English)

Select ‘Basic Configuration’.

The Printer Driver sub menu is shown.

Select Printer Driver The Printer Driver sub menu is shown after you have selected ‘Basic Configura-

tion’ in the Main Menu.

A printer driver is a device driver designed to drive a particular type of printer.

There are two printer drivers available:

• PostScript Level 1 (default)

• PostScript Level 2

Select the printer driver matching your attached printer.

If an incorrect selection is made during the Basic Configuration, press Enter

until the Main Menu appears, then re-enter the Basic Configuration.