User`s manual

Preface
2 Axis AFP User’s Manual
About this Manual
This manual applies to the Axis AFP printer controller with firmware re-
lease 2.10 and to subsequent releases until otherwise notified.
The manual consists of seven sections and additional appendices:
1. INTRODUCTION – The AFP general description.
2. INSTALLATION – Installation of the AFP.
3. CONFIGURATION – How to configure the AFP.
4. ADVANCED FUNCTIONS – Parameter programming and Hex
Transparency (Coax mode only).
5. FONTS – How fonts are handled by the AFP.
6. SOLVING PROBLEMS – Checklist for identifying problems.
7. COMPATIBILITY CONSIDERATIONS – Differences between
IBM printers and the emulation.
APPENDICES – Additional information; Parameter List, Character
Table, Front and Back Panels, Printer Cable Configuration, PC-Host
Sharing, Technical Specifications and Related Documentation.
Every care has been taken in the preparation of this manual; if you detect
any inaccuracies or omissions, please inform us at the address on the back
cover.
Axis Communications AB cannot be held responsible for any technical or
typographical errors and reserves the right to make changes in this manual
and to the firmware without prior notice.