User`s manual

Appendix D: Printer Cable Configuration
Axis AFP User’s Manual 131
Appendix D
Printer Cable Configuration
This section provides you with technical information on the printer and PC-Host
sharing cables. All cables can be obtained from your dealer/distributor. See Appen-
dix E for cable part numbers.
Printer/PC-sharing Port Pin-Out
Port 1 is the 44-pin female D-sub connector on the Axis AFP back panel. The ta-
ble below shows the pin configuration:
Pin Signal Pin
Signal
1 Strobe (Centronics) 27 Strobe (PC)
2 D0 (Centronics) 28 D0 (PC)
3 D1 (Centronics) 29 D1 (PC)
4 D2 (Centronics) 30 D2 (PC)
5 D3 (Centronics) 31 D3 (PC)
6 D4 (Centronics) 32 D4 (PC)
7 D5 (Centronics) 33 D5 (PC)
8 D6 (Centronics) 34 D6 (PC)
9 D7 (Centronics) 35 D7 (PC)
10 Acknowledge (Centronics) 36 Acknowledge (PC)
11 Busy (Centronics) 37 Busy (PC)
12 Paper End (Centronics) 38 Paper End (PC)
13 Select (Centronics) 39 Select (PC)
18 +5V 40 Init (PC)
19 +5V 41 Error
20 GND 42 Init (Centronics)
21 GND