User`s manual

Section 2: Installation
Axis AFP User’s Manual 13
System Configuration, twinax mode
Twinax: The AS/400 configuration is easiest done using the Auto Configuration to define
an [
*IPDS] printer. If in doubt, consult your system operator.
Before you begin:
• If you plan to print in duplex, the Axis AFP must be configured for
IBM 4028/3916 or 3816 emulation, see Section 3, Configuration . IBM 4028/
3916 is the factory default configuration
• The Axis AFP works in both [AFP = *YES] and [AFP = *NO] mode:
[AFP = *YES] lets you make full use of OS/400 AFP Print Services,
including overlays (electronic forms), page segments (bit images), down-
loaded fonts, etc. You can also send print jobs from a mainframe through the
AS/400.
[AFP = *NO] lets you print from Office/400 (including merged graphics),
BGU, GDDM, etc. at significantly higher throughput rate, but with less
functionality.
You will need a high authorization to make the configuration. Log in as Secu-
rity Officer ( *SECOFR privileges).