User`s manual

Appendix C: The Front and Back Panels
Axis AFP User’s Manual 127
The Back Panel
The back panel comprises all connectors, a rotary switch, and the coax/twinax
mode switch. See illustration in Section 1.
The Parallel printer port connector is described in Appendix D (pin configura-
tion) and Appendix E (PC-Host sharing).
The Rotary Switch The ten-position rotary switch is used to select the functions available in the Func-
tion Mode. See “Function Mode” on page 128.
When not in Function Mode, the different positions have the following meaning:
3270/Coax mode: Position
Description
0 Normal print mode
1 – 8 Reserved
9 Enter Function Mode
5250/Twinax mode: Position
Description
0 – 6 Normal print mode (Device address)
7 – 8 Reserved
9 Enter Function Mode
If the rotary switch is set to ‘9’ at power up, you must select position ‘0’ and
then switch back to ‘9’ to enter the Function Mode.