User`s manual

Appendix A: The Parameter List
Axis AFP User’s Manual 115
#3152 Parallel-2 End String
Contains a hexadecimal string which is sent to the printer when the input switches
from Parallel-2 to another input port.
Note: 1. This parameter is only active if the optional PC-Host sharing board is
installed.
2. The maximum number of bytes programmed into this string is 16 kbytes.
Related parameters: #3150 Parallel-2 Time-out
#3151 Parallel-2 Begin String
#3200 Power On String
Contains a hexadecimal string which is the first data sent to the printer at Axis AFP
power up.
Note: 1. The maximum number of bytes programmed into this string is 16 kbytes.
Hints: 1. For printers that have more emulations than PostScript, this string can be
programmed to select PostScript mode, ensuring a correct start-up in
PostScript mode.
2. Can be used to define User Defined Fonts.
Value
Description
* $04 (default)
<any string>
Printer control commands.
<empty>
Nothing is sent
Value
Description
<any string>
Printer control commands.
* <empty>
Nothing is sent. (default)