User`s manual

Appendix A: The Parameter List
108 Axis AFP User’s Manual
#3000 Printer Driver
Defines the attached printer type.
Note: 1. This parameter value becomes effective at power up.
#3001 PostScript Virtual Memory
This parameter defines the amount of free virtual memory in the PostScript print-
er for Axis AFP use. This will be used for storing PostScript routines and system
downloaded fonts. Adding more memory in the printer generally means that this
parameter can be adjusted upwards to let Axis AFP take advantage of more mem-
ory and thus increase throughput. The Axis AFP power up page informs on the
free VM Size and the setting of this parameter.
Notes: 1. The VM Size does not equal the total amount of memory in the printer, but
what PostScript reports is free for usage. This value is printed on the Axis AFP
power-up page.
2. The minimum required VM Size memory is 200 kbytes. If host down-loaded
fonts are used, a minimum of 700 kbytes is recommended.
3. Some printers allow partitioning of their memory to set the virtual memory
size from the front panel.
Value
Description
* Level 1 PS
PostScript Level 1. (default)
Level 2 PS
PostScript Level 2.
Value
Description
100 - 9990
PostScript VM size in kbytes.
* 1200
Factory default value.
Setting a higher VM Size value on this parameter than what the printer has
available, may cause printer memory overflow and loss of data.