User`s manual

Section 5: Setting Up - Windows
90 AXIS 570/670 MIO User’s Manual
Windows
Client-Server Printing:
Client Setup
To print in client-server mode from within a Windows NT
environment, it is necessary to setup the server on a Windows for
Workgroups workstation.
Follow these steps to use your AXIS 570/670 MIO for client-server
printing at a Windows NT client:
1. Open Print Manager.
2. In the Printer menu, select Connect to Printer...
3. In the Shared Printers list, select the printer you want to use.
Click OK.
The client setup is completed and you can now print through your
AXIS 570/670 MIO.
Windows NT - LPD Printing
This section describes how to set up a Windows NT Server (ver. 3.5 or
later) for LPD printing over the TCP/IP protocol.
If you have not already done so, you should perform the TCP/IP basic
setup procedures prior to installing a printer for LPD printing. These
procedures are defined in Basic Set Up for TCP/IP, on page 26.