User`s manual

Section 5: Setting Up - Windows
AXIS 570/670 MIO User’s Manual 89
Windows
Windows NT
Setup for
Peer-to-Peer Printing
Follow these steps to install your AXIS 570/670 MIO for peer-to-peer
printing at a Windows NT workstation:
1. Double-click the AXIS Print Utility icon.
2. In the Port menu, click Add.
3. In the NPS Port list, select the AXIS 570/670 MIO port to be
installed. The port appears as <name>.MIO, where <name> is AX
followed by last six digits of your print server number e.g.
AX100086.MIO. However, this alphanumeric name will be
superseded by any new name given to your AXIS 570/670 MIO
when using AXIS NetPilot™.
4. Accept or change the suggested Windows Port name, and type
any comments in the Description field. Make a note of the
Windows Port name as you will need this later, then click OK to
install the Windows Port.
5. In the Port menu, click Connect to bring up Print Manager.
6. In the Printer menu, click Create Printer.
7. Type a name in the Printer Name field, select a suitable printer
driver from the Driver list, and select Other... in the Print to list.
8. In the Print Destinations dialog, select Local Port, then click OK.
9. In the Port Name field, type: C:\~\<port>
where C:\~ is your spool directory, and <port> is the Windows
Port name from step 4. Click OK.
10. Close the Print Manager.
The setup is completed and you can now print through your
AXIS 570/670 MIO.
Note:
❏ AXIS Print Utility for Windows must be running when you print
through your AXIS 570/670 MIO. We strongly recommend that
you copy the AXIS Print Utility icon into your StartUp folder.