User`s manual

Section 5: Setting Up - Windows
AXIS 570/670 MIO User’s Manual 87
Windows
Windows 95
Setup for
Peer-to-Peer Printing
Follow these steps to install your AXIS 570/670 MIO for peer-to-peer
printing at a Windows 95 workstation:
1. Double-click the AXIS Print Utility icon.
2. In the Port menu, click Add.
3. In the NPS Port list, select the AXIS 570/670 MIO port to be
installed. The port appears as <name>.MIO, where <name> is AX
followed by last six digits of your print server number e.g.
AX100086.MIO. However, this alphanumeric name will be
superseded by any new name given to your AXIS 570/670 MIO
when using AXIS NetPilot™.
4. Accept or change the suggested Windows Port name, and type
any required comment in the Description field. Make a note of
the Windows port name as you will need this later, then click OK
to install the Windows port.
5. In the Port menu, click Connect to bring up the Printers folder.
6. Double-click the Add Printer icon. The Add Printer Wizard will
then guide you through the installation. Click Next to proceed.
7. Choose Local Printer, then click Next.
8. Choose Manufacturer and Printer, then click Next.
9. Select the Windows port name from step 4, then click Next.
10. Accept the suggested Printer Name, or type in one of your own,
then click Next.
11. Click Finish to complete the installation.
The setup is completed and you can now print through your
AXIS 570/670 MIO.
Note:
❏ AXIS Print Utility for Windows must be running when you print
through your AXIS 570/670 MIO. We strongly recommend that
you establish a shortcut to the AXIS Print Utility within your
StartUp file.