User`s manual

Section 4: Setting Up - NetWare
AXIS 570/670 MIO MIO User’s Manual 75
NetWare
Configuring via the
Property Pages
Select the required Network Print Server and then Properties from the
Setup menu in the AXIS NetPilot™ Main window, or alternatively
click the Properties Icon on the Toolbar. A comprehensive set of
Property Pages
are then presented with an appropriate array of selection
tabs.
A Property Page showing general parameters to be set
Property Pages
: This is AXIS NetPilot’s way of allowing you to inspect
and change any of the AXIS 570/670 MIO parameters.
There are different Property Pages for each of your
network environments. Simply click the NetWare tab to
gain access to the NetWare configuration.
AXIS 570/670 MIO
Modes
The AXIS 570/670 MIO can run in either Print Server Mode or
Remote Printer Mode. The following overview explains the
advantages and limitations of each mode.