User`s manual

Section 4: Setting Up - NetWare
AXIS 570/670 MIO MIO User’s Manual 71
NetWare
Section 4 Setting Up - NetWare
If you have not already done so, you should use the Installation Wizard
in AXIS NetPilot™ to install your network print server, refer to
Section 2 - Basic Installation.
After performing the basic installation, the AXIS 570/670 MIO is
ready for printing within the NetWare environment. This section
provides information for making further adjustments to the
configuration.
If you intend to operate your AXIS 570/670 MIO in a multiprotocol
environment, you should also proceed to the other relevant sections in
this manual, namely:
Section 3 Setting Up - SNA
Section 5 Setting Up - Windows
Section 6 Setting Up - OS/2
Section 7 Setting Up - Macintosh
Section 8 Setting Up - UNIX
Section 9 Web Based Management
Set Up using the AXIS NetPilot™
You may use the AXIS NetPilot™ to:
• Set up the print queues, printers, and print servers.
• Set up the configuration parameters of the AXIS 570/670 MIO.
• Monitor the printers on the network.
• Upgrade the AXIS 570/670 MIO.
Notes:
❏ AXIS NetPilot™ contains an extensive on-line help facility to
assist you with any of the operations listed above.
❏ The AXIS NetPilot™ software is designed to set up a range of
different network environments. Therefore you will encounter
windows that are relevant to other systems as well as NetWare.
SNA