User`s manual

Section 3: Setting Up - SNA
68 AXIS 570/670 MIO User’s Manual
SNA
ASCII Printer Driver
This parameter should match the printer type you have connected to
your AXIS 570/670 MIO:
• ASCII printer driver
Name:
PRDRIVER
, Default:
PCL5
Description:
Notes:
❏ If you wish to edit the control sequences within a printer driver,
the USER driver must be selected. See AXIS Network Print Server
Technical Reference for details.
Updating parameters
This is most easily done when installing the AXIS 570/670 MIO using
the Installation Wizard in AXIS NetPilot™, which requires a
computer running Windows attached to your LAN.
Alternatively, you can do the setting up using FTP, or HTTP from a
Web browser, or using extended IBM printer emulation. To set
parameters using a web browser, you first need to assign an IP address
to the AXIS 570/670 MIO.
Using extended IBM printer emulation means setting up the AXIS
570/670 MIO by printing a file containing extended IBM emulation
commands to it after you have established communication with your
IBM host. The configuration is started by inserting the sequence
%CONFIG+
in your text. To protect your settings, a password must be
provided. By default, the password is
pass
. You may then set the
parameter values directly using the syntax shown below:
Syntax:
Value Printer
PCL5
PCL5 printer
PCL4
PCL4 printer
USER
Editable Printer Driver.
<Parameter name> = <value> [, <value>];