User`s manual

Section 3: Setting Up - SNA
60 AXIS 570/670 MIO User’s Manual
SNA
7. Configure Downstream PU. Choose Configure Downstream PUs
and press insert. Give it a name and fill in starting LU address or
leave at default, type in number of DownStream LUs and logical
adapter name:
Example:
The CSCON adds new parameters according to the adapter type you
have set. The resulting screen can look like this:
Example:
Concentrator
gateway, Microsoft
This is an outline of the procedure for configuring to a Microsoft SNA
Server. More information is provided in the Support section of the Axis
WWW Home Page.
1. Configure host connection.
2. Configure downstream connection.
3. Select host connection and assign one or more DownStream LUs to
it.
4. Select downstream connection and associate the DownStream LUs
(from step 3) with that connection.
5. If necessary, reorder the DownStream LU numbers, that is, the LU
numbers used by the downstream system.
6. To connect multiple PUs (boxes) repeat step 2-5.
Configure Downstream PU Connection
Downstream PU name (CP name): _____________________________DPUname
Starting downstream LU address: ___________________________2
Number of downstream LUs: _________________________________1
Logical adapter name: _____________________________________
Netware Comm Services Config V2.0 Wednesday 1996 September 4 16.27
Configure LUs for Downstream PUs _______________Downstream PU: AXIS570/670MIO
DLU __Address __PU Profile __LU Address __LU Type __Model __VTAM LU Name
002 __(0x02) ____SAA_MAIN ____15 (0x0F) __Printer __________________ACP4