User`s manual

Section 3: Setting Up - SNA
56 AXIS 570/670 MIO User’s Manual
SNA
Printer Description
Create a printer description.
Example:
Printer description (command: CRTDEVPRT).
Notes:
❏ Attached controller should be set to the name of the previously
defined controller description
❏ In the LU definition, the LOCADDR number maps to the Logical
Printer number of the AXIS 570/670 MIO. The first eight Local
Addresses pass the printout through Logical Printer 1-8.
However, some older IBM systems do not allow Local Address 1 to
be used for printing. See Using Logical Printers to Customize your
Printing on page 111.
❏ A writer and a print queue with the same name as the printer
description will be automatically created.
Initializing
Communication
To initialize the communication with the AXIS 570/670 MIO do the
following:
1. “Vary on” the controller and device description.
2. Start the writer.
Create Device Desc (Printer) (CRTDEVPRT)
Type choices, press Enter.
Device description . . . . . . . > PRT670 Name
Device class . . . . . . . . . . > *RMT
*LCL, *RMT, *VRT, *SNPT
Device type . . . . . . . . . . > 3287
3287, 3812, 4019, 4201...
Device model . . . . . . . . . . > 0
0, 1, 2, 3, 4, 10, 13, 200...
Local location address . . . . . > 02 00-FE
Online at IPL . . . . . . . . . *YES *YES, *NO
Attached controller . . . . . . > CTL670 Name
Separator program . . . . . . . *NONE Name, *NONE
Library . . . . . . . . . . . Name, *LIBL, *CURLIB
Printer error message . . . . . *INQ *INQ, *INFO
Message queue . . . . . . . . . QSYSOPR Name, QSYSOPR
Library . . . . . . . . . . . *LIBL Name, *LIBL, *CURLIB
Application type . . . . . . . . *NONE *NONE, *NRF, *DEVINIT...
Text 'description' . . . . . . . 'HP Printer with AXIS 570/670 MIO'
Bottom
F3=Exit F4=Prompt F5=Refresh F10=Additional parameters F12=Cancel
F13=How to use this display F24=More keys