User`s manual

Section 3: Setting Up - SNA
AXIS 570/670 MIO User’s Manual 53
SNA
Example:
How to create a Printer Device description
Initializing
Communication
To initialize the communication with the AXIS 570/670 MIO do the
following:
1. Vary on controller and device description
2. Start the printer writer.
3. Set the print server parameter AUTODIAL to YES.
Verify the
Communication
The easiest way to test the communication is by sending a print job to
the AXIS 570/670 MIO. If there are problems, press the test button
once to print the test page where you can find the present SNA link
status.
The AXIS 570/670 MIO is now ready for use in the SNA
environment. If needed, it can be further adapted to your system using
AXIS NetPilot™ or by printing special configuration commands to it.
See AXIS 570/670 MIO Set-up on page 61. Please note that you may
have to edit the host configuration you have just made according to the
new AXIS 570/670 MIO settings.
Create Device Desc (Printer) (CRTDEVPRT)
Type choices, press Enter.
Device description . . . . . . . > PRT670 Name
Device class . . . . . . . . . . > *RMT
*LCL, *RMT, *VRT, *SNPT, *LAN
Device type . . . . . . . . . . > 3812 3287, 3812, 4019, 4201...
Device model . . . . . . . . . . > 1 0, 1, 2, 3, 4, 10, 13, 200...
Local location address . . . . . > 02 00-FE
Online at IPL . . . . . . . . . *YES *YES, *NO
Attached controller . . . . . . > RWS670A Name
Font:
Identifier . . . . . . . . . . > 3 3, 5, 11, 12, 13, 18, 19...
Point size . . . . . . . . . . *NONE 000.1-999.9, *NONE
Form feed . . . . . . . . . . . *TYPE *TYPE, *CONT, *CUT, *AUTOCUT
Separator drawer . . . . . . . . *FILE 1-255, *FILE
Separator program . . . . . . . *NONE Name, *NONE
Library . . . . . . . . . . . Name, *LIBL, *CURLIB
Printer error message . . . . . *INQ *INQ, *INFO
More...
F3=Exit F4=Prompt F5=Refresh F10=Additional parameters F12=Cancel
F13=How to use this display F24=More keys