User`s manual

Section 3: Setting Up - SNA
AXIS 570/670 MIO User’s Manual 49
SNA
Note:
❏ The sample below assumes that the local station address etc. has
not been changed in the AXIS 570/670 MIO. The values that
should be entered are in bold. The underlined values must be
entered exactly as shown.
Example:
How to create an APPC controller description
Create Ctl Desc (APPC) (CRTCTLAPPC)
Type choices, press Enter.
Controller description . . . . . > APPC670A Name
Link type . . . . . . . . . . . > *LAN
*ANYNW, *FAX, *FR, *IDLC...
Online at IPL . . . . . . . . . *YES *YES, *NO
APPN-capable . . . . . . . . . . *YES
*YES, *NO
Switched line list . . . . . . . > ssssssssssss Name
+ for more values
Maximum frame size . . . . . . . > 1033
265-16393, 256, 265, 512...
Remote network identifier . . . > APPN Name, *NETATR, *NONE, *ANY
Remote control point . . . . . . > A8CE2149 Name, *ANY
Exchange identifier . . . . . . 00000000-FFFFFFFF
Initial connection . . . . . . . *DIAL *DIAL, *ANS
Dial initiation . . . . . . . . *LINKTYPE *LINKTYPE, *IMMED, *DELAY
LAN remote adapter address . . . 40067000014 000000000001-FFFFFFFFFFFF
APPN CP session support . . . . *NO
*YES, *NO
APPN node type . . . . . . . . . *LENNODE
*ENDNODE, *LENNODE...
APPN/HPR capable . . . . . . . . *YES *YES, *NO
More...
F3=Exit F4=Prompt F5=Refresh F10=Additional parameters F12=Cancel
F13=How to use this display F24=More keys