User`s manual

Section 3: Setting Up - SNA
AXIS 570/670 MIO User’s Manual 43
SNA
Local major
node definitions
The example below shows how the print server PU and LU definitions
may be coded in a local major node definition:
Note:
❏ If the LAN media is ethernet, the MAC-addresses in the 3174 as
well as the AXIS 570/670 MIO have to be reversed bytewise.
Example:
00408C1B06D4 -> 000231D8602B
Verify the
Communication
The easiest way to test the communication is by sending a print job to
the AXIS 570/670 MIO. If there are problems, press the test button
once to print the test page where you can find the present SNA link
status.
The AXIS 570/670 MIO is now ready for use in the SNA
environment. If needed, it can be further adapted to your system using
the AXIS NetPilot™ or by printing special configuration commands
to it. See AXIS 570/670 MIO Set-up on page 61. Please note that you
may have to edit the host configuration you have just made according
to the new AXIS 570/670 MIO settings.
* 570/670 MIO DSPU DEFINITION
DSPU670 PU CUADDR=E31, X
MODETAB=MODE3290, X
PUTYPE=2,ISTATUS=ACTIVE,MAXBFRU=1
DSPULU02 LU LOCADDR=2 X
SSCPFM=USSSCS, X
USSTAB=USSTAB, X
PACING=1, X
VPACING=2, X
ISTATUS=ACTIVE, X
LOGAPPL=MWTC, X
DLOGMOD=SCS570/670
DSPULU03 LU LOCADDR=3, X
SSCPFM=USSSCS, X
USSTAB=USSTAB, X
PACING=1, X
VPACING=2, X
ISTATUS=ACTIVE, X
LOGAPPL=MWTC, X
DLOGMOD=SCS570/670