User`s manual

Section 3: Setting Up - SNA
AXIS 570/670 MIO User’s Manual 41
SNA
Switched major
node definitions
The example below shows how the print server PU, PATH, and LU
definitions may be coded in a switched major node definition.
Notes:
❏ In the PU definition,
IDNUM
should be set to the five last digits of
the AXIS 570/670 MIO node address,
NODE_ADDR
. By default
NODE_ADDR
is the five last digits of the AXIS 570/670 MIO serial
number.
* PU definition
* E07xxxxxx is the node ID set in AXIS 570/670 MIO.
*
PU6701 PU ADDR=04, X
PUTYPE=2, X
IDBLK=E07, X
IDNUM=nnnnn, X
MAXPATH=1, X
SSCPFM=USSSCS, X
USSTAB=USSMAST, X
VPACING=(0)
*
* Path definition
* xxxxxxxxxxxx is the 12 last digits of the MAC
* address of the AXIS 570/670 MIO
*
PA6701 PATH DIALNO=0104xxxxxxxxxxxx, X
GID=1, X
PID=1, X
GRPNM=gggggg
*
* LU definitions.Use either LU6701 or LU6703
*
* LU type 1 (SCS)
*
LU6701 LU LOCADDR=2, X
DLOGMOD=SCS670, X
VPACING=7, X
PACING=3
*
* LU type 3 (3270DS)
*
LU6703 LU LOCADDR=2, X
DLOGMOD=DSC670, X
VPACING=7, X
PACING=3