User`s manual

Section 2: Basic Installation

34 AXIS 570/670 MIO User’s Manual

Using BOOTP

in UNIX

Follow these step-by-step procedure below to use the BOOTP method:

1. Append the following entry to your boot table. This is typically

performed editing the file:

/etc/bootptab

Example for AXIS 570 MIO /Ethernet:

Example for AXIS 670 MIO /Token Ring:

2. Update your host table and alias name databases as described

previously.

3. If it is not already running, start the BOOTP daemon. This is

typically performed using the command

bootpd

4. Restart the AXIS 570/670 MIO to down-load the Internet

address, default router address, and net mask.

Notes: ❏ The

and

fields must be entered exactly as in the example.

❏ The

field is the Ethernet address and the

field is the

Internet address of your AXIS 570/670 MIO.

❏ The

and

fields correspond to the default router address and

net mask (

DEF_ROUT and NET_MASK).

<host name>:ht=<hardware type>:vm=<vendor magic>:\

:ha=<hardware address>:ip=<Internet address>:\

:sm=<subnet mask>:gw=<gateway field>

npsname:ht=ether:vm=rfc1048:\

:ha=00408c100086:ip=192.168.3.191:\

:sm=255.255.255.0:gw=192.168.1.1

npsname:ht=tr:vm=rfc1048:\

:ha=000231480061:ip=192.168.3.191:\

:sm=255.255.255.0:gw=192.168.1.1