User`s manual

Section 2: Basic Installation
30 AXIS 570/670 MIO User’s Manual
AXIS 670 Token Ring Print Server:
Start a DOS window. Type the following command:
Example:
The host will return Reply from 192.168.3.191... or
some similar message. This indicates that the address has been set
and the communication is established.
Notes:
❏ In the Windows 95 implementation of ARP you must first, if you
have an empty ARP table (seen with
arp -a
), ping an existing
unit on your network before setting the IP number of your AXIS
570/670 MIO.
❏ Please note that when you execute the
ping
command for the first
time, you will experience a significantly longer response time than
is usual.
❏ The
arp -d
command is advised so that the Internet to Ethernet
address information is stored as a dynamic parameter within the
host’s cache memory. Failure to execute this command will mean
that the mapping is static and consequently installed permanently
on the host.
arp -s 802.5 <Internet address> <node address>
ping <Internet address>
arp -d <Internet address>
arp -s 802.5
192.168.3.191
00-02-31-48-00-61
ping
192.168.3.191
arp -d <
192.168.3.191
>