User`s manual

Section 2: Basic Installation
24 AXIS 570/670 MIO User’s Manual
Environments
You may choose which networking environments you want to
configure the AXIS 570/670 MIO for, i.e. SNA, NetWare, TCP/IP,
Windows, OS/2 or AppleTalk. You may enable all of the environments
if your network comprises various different platforms.
NetWare NDS
You may place NetWare Print Queues on a specific bindery server, or
alternatively into a NDS Tree.
Print Queues
The default Print Queue names comprise of the print server name
followed by the Port name.
Example of default Print Queue Names for each of the operating environments
The Installation Wizard allows you to amend the default names if you
wish.
The Internet Address
During the Installation Wizard you may choose the method the AXIS
570/670 MIO employs for obtaining an Internet address. ARP,
RARP, BOOTP and DHCP are all supported. Refer to page 28 for
more information on these methods.
Test Page
The final user prompt in the Installation Wizard allows you to print a
test page through NetWare. This page displays the name of all the
NetWare servers the AXIS 570/670 MIO is connected to and shows
the status of each connection. This will assist diagnosis in the event of
a configuration error.
Notes:
❏ The parameters entered during installation are not permanent;
they can be altered at any time according to your network printing
requirements.
Environment
Default Names
NetWare
AXIS1A0003_MIO
Windows
AX1A0003.MIO
AppleTalk
AXIS1A0003_MIO