User`s manual

Section 2: Basic Installation
AXIS 570/670 MIO User’s Manual 21
Macintosh
• If the only workstations on your network are Apple computers, you
should refer directly to:
- Section 7 Setting Up - Macintosh
Web Based
Management
If you are using the TCP/IP protocol suite and also have access to an
Internet browser, you may manage your AXIS 570/670 MIO server
using HTTP, regardless of your system platform. Should you wish to
use this easy-to-use configuration method, you should initially refer to:
• Basic Set Up for TCP/IP. Refer then to:
• Section 9 Web Based Management
Front Panel Set-Up
Basic network set-up is most easily done using the AXIS NetPilot™ as
described on page 23. If you do not have any computers running
Windows and NetWare or NetBIOS/NetBEUI you can also use the
printer’s front panel to make the necessary configuration as deescribed
in "Editing Using the Printer Front Panel", on page 135.
Installation Summary
The recommended Installation, Management and Configuration tools
for the AXIS 570/670 MIO are summarized in the following table:
Recommended Installation, Configuration and Management tools
for the AXIS 570/670 MIO
* You may use the resident LPD monitor in Windows NT to print
via TCP/IP. A shareware LPR spooler is available for
Windows 95, or Windows for Workgroups. You can download
Operating System
Protocols
Installation
Configuration/
Management
IBM AXIS NetPilot AXIS NetPilot
IPX/SPX AXIS NetPilot AXIS NetPilot
TCP/IP (UNIX) AXINSTALL
FTP, SNMP,
Web browser
TCP/IP (Windows)
Use LPD
Monitor/Spooler*
FTP, SNMP,
Web browser
NetBIOS/NetBEUI
(Windows)
AXIS Print Utility for Windows
AXIS NetPilot
NetBIOS/NetBEUI
(OS/2)
AXIS Print Utility for OS/2
AXIS NetPilot
Apple EtherTalk Standard using the Chooser (**)