User`s manual

Appendix D: Updating the Software
160 AXIS 570/670 MIO User’s Manual
Web Browser
Support
Because the AXIS 570/670 MIO supports the HTTP protocol over
TCP/IP, you may download the latest software releases directly from
the Software Upgrade Page.
To display the Software Upgrade Page simply click the ‘Software
upgrade’ link within the Management Page. By following the
instruction provided you may then automatically initiate a file transfer
between the Axis Public Archive Server and your workstation. Once
the transfer is complete, you should then download this image file to
the AXIS 570/670 MIO using FTP, as described in Upgrading over the
Network using FTP, below
Your dealer
Contact your dealer to check if there have been any new releases of the
software. You should have your present version number ready to
compare against the latest software release.
Upgrading the Software
There are three methods with which to update to the
AXIS 570/670 MIO Flash memory:
• Flash loading port using the optional Flash loading kit, or
• over the network using FTP on a TCP/IP network, or
• using the AXIS NetPilot™
The preferred methods are described below.
Note:
❏ Updating instructions are also supplied with the software update.
❏ After flash loading the HP printer will show “80 Service (0101)”
on the front panel display. To clear this message the printer must
be manually turned off and on.